Arcadia Finance
@arcadia-finance
关于 Arcadia Finance
MCP server for Arcadia Finance, a platform to manage Uniswap and Aerodrome concentrated liquidity positions with built-in leverage, automated rebalancing, and yield optimization. Read protocol data and build unsigned transactions for LP management, borrowing, deposits, and more.
基本信息
配置
使用下面的配置,将此服务器添加到你的 MCP 客户端。
{
"mcpServers": {
"arcadia-finance": {
"command": "npx",
"args": [
"-y",
"@arcadia-finance/mcp-server"
]
}
}
}工具
38Get full overview of an Arcadia account: health factor, collateral value, debt, deposited assets, liquidation price, and automation status. Health factor = 1 - (used_margin / liquidation_value): 1 = no debt (safest), >0 = healthy, 0 = liquidation threshold, <0 = past liquidation. Higher is safer. On Base, also returns which asset managers are enabled (rebalancer, compounder, yield_claimer, merkl_operator, cow_swapper). LP positions in assets[] include a dex_protocol field (slipstream, slipstream_v2, staked_slipstream, staked_slipstream_v2, uniV3, uniV4) — use this as the dex_protocol param for write.asset_manager.* tools. The automation object uses internal AM key names (slipstreamV1, slipstreamV2, uniV3, uniV4): map slipstreamV1 → 'slipstream'/'staked_slipstream', slipstreamV2 → 'slipstream_v2'/'staked_slipstream_v2', uniV3 → 'uniV3', uniV4 → 'uniV4'. Numeric fields without a _usd suffix are in the account's numeraire token raw units (divide by 10^decimals: 6 for USDC, 18 for WETH, 8 for cbBTC). Fields ending in _usd are in USD with 18 decimals (divide by 1e18). health_factor is unitless. Asset amounts are raw token units. To list all accounts for a wallet, use read.wallet.accounts.
Get historical collateral and debt values for an Arcadia account over time. Returns a time series of snapshots (timestamp, collateral_value, debt_value, net_value). Each value is the account's net value in USD (human-readable, not raw units). Useful for charting account performance over a period.
Get PnL (cost basis) and yield earned for an Arcadia account. Returns lifetime totals: cost basis vs current value (negative cost_basis = net profit withdrawn), net transfers per token, total yield earned in USD and per token. cost_basis, current_value, cost_diff are in USD (human-readable). Per-token fields (net_transfers, summed_yields_earned) are in raw token units.
List all Arcadia lending pools: TVL, utilization, available liquidity. Key fields: interest_rate = current borrow cost, lending_apy = lender yield. All rates are decimal fractions (1.0 = 100%, 0.06 = 6%). For APY history on a specific pool, use read.pool.info.
Get detailed info for a single lending pool including APY history over time. Useful for analyzing rate trends and comparing pools. Use read.pool.list to discover pool addresses.
List supported collateral assets on Arcadia. Returns compact list (address, symbol, decimals, type). Use search to filter by symbol substring. For USD prices, use read.asset.prices.
Get USD prices for one or more asset addresses. Pass a single address or comma-separated addresses. Returns a price map keyed by address.
Get Arcadia LP strategies. Use featured_only=true for curated top strategies (recommended first call). Returns a paginated list with 7d avg APY for each strategy's default range. Increase limit or use offset for pagination. All APY values are decimal fractions (1.0 = 100%, 0.05 = 5%). For full detail on a specific strategy (APY per range width), use read.strategy.info.
Get full detail for a specific LP strategy by ID — includes APY per range width (narrower range = higher APY but more rebalancing cost/risk), pool info, and configuration. Use read.strategy.list to discover strategy IDs. All APY values are decimal fractions (1.0 = 100%, 0.05 = 5%).
Get a rebalancing recommendation for an Arcadia account — suggests asset changes to optimize yield. Uses 1d APY (not 7d like read.strategy.list), so recommended strategies may differ from the list ranking. APY values are decimal fractions (0.05 = 5%). weekly_earning_difference is in USD.
Get the Arcadia points leaderboard (paginated). For a specific wallet's points balance, use read.wallet.points.
Get Arcadia workflow guides and reference documentation. Call this before multi-step workflows (opening LP positions, enabling automation, closing positions) or when you need contract addresses, asset manager addresses, or strategy parameters. Topics: overview (addresses + tool catalog), automation (rebalancer/compounder setup), strategies (step-by-step templates), selection (how to evaluate and parameterize strategies).
Get native ETH and ERC20 token balances for a wallet address. Reads directly from chain via RPC multicall. Use before write.account.add_liquidity or write.account.deposit to verify the wallet has sufficient tokens. Returns both raw balance (smallest unit/wei) and formatted (human-readable) per token.
Check ERC20 token allowances for a spender address. Use before write.wallet.approve to avoid redundant approvals — skip approving if the current allowance is already sufficient.
List all Arcadia accounts owned by a wallet address. Returns a summary of each account (address, name). Call read.account.info with a specific account_address for full details like health factor, collateral, and debt.
Get Arcadia points balance for a specific wallet address.
List all available automation intents with their tool names, required parameters, and supported chains. Use this to discover which automations can be configured and what each one does. Each intent has a corresponding write.asset_manager.{id} tool that returns encoded args. To apply automations, call the intent tools then pass the combined result to write.account.set_asset_managers. All intent tools accept enabled=false to disable. Multiple intents can be combined by merging their returned arrays into a single set_asset_managers call.
Build an unsigned transaction to create a new Arcadia account via the Factory contract. account_version: 3 with creditor → V3 margin account (can borrow/leverage). account_version: 0 or 4 → V4 spot account (no borrowing, creditor is ignored, any ERC20 allowed). Returns the predicted account address (deterministic via CREATE2).
Build an unsigned transaction to deposit assets into an Arcadia account as collateral. Supports ERC20 tokens and ERC721 NFTs (LP positions). NOT needed before write.account.add_liquidity — that tool deposits from wallet atomically. Ensure the account is approved first (call read.wallet.allowances to check, then write.wallet.approve if needed). Account version is auto-detected on-chain (override with account_version if needed).
Build an unsigned transaction to withdraw assets from an Arcadia account to the owner's wallet. Only the account owner can withdraw. Will revert if the account has debt and withdrawal would make it undercollateralized. Does not support max_uint256 — pass exact amounts from read.account.info. Account version is auto-detected on-chain (override with account_version if needed).
Build an unsigned transaction to borrow from an Arcadia lending pool against account collateral. NOT needed for leveraged LP — write.account.add_liquidity handles borrowing internally when leverage > 0. Only works with margin accounts (created with a creditor/lending pool). Spot accounts (no creditor) cannot borrow — the tool will validate this and reject. Before borrowing, verify the account has positive free margin via read.account.info: collateral_value must exceed used_margin.
Repay debt to an Arcadia lending pool using tokens from the wallet (requires ERC20 allowance). To repay using account collateral instead (no wallet tokens needed), use write.account.deleverage. Check allowance first (read.wallet.allowances), then approve the pool if needed (write.wallet.approve). Check outstanding debt with read.account.info.
Multi-step flash-action: atomically combines [deposit from wallet] + [use account collateral] + [swap to optimal ratio] + [mint LP] + [borrow if leveraged] in ONE transaction. Do NOT call write.account.deposit separately. Capital sources: wallet tokens (deposits array), existing account collateral (use_account_assets=true), or both. Check allowances first (read.wallet.allowances), then approve if needed (write.wallet.approve). Supports depositing multiple tokens and minting multiple LP positions in one tx. Works with both margin accounts (can leverage) and spot accounts (no leverage). For workflows, call read.guides('strategies'). The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation. expected_value_change is in raw units of the account's numeraire token (6 decimals for USDC, 18 for WETH). Negative = cost to open, positive = value gained. Compare before.total_account_value and after.total_account_value for the full picture.
Flash-action: PARTIALLY decreases liquidity from an LP position. The position remains open with reduced liquidity; underlying tokens stay in the account. For FULL position exit (burn LP + swap + repay + withdraw), use write.account.close instead — it batches everything into one atomic transaction. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation.
Flash-action: swaps assets within an Arcadia account in one atomic transaction. The backend finds the optimal swap route. NOTE: If you are closing a position (swap + repay + withdraw), prefer write.account.close which batches everything atomically. Only use this tool for standalone swaps within an active position. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation — if tenderly_sim_status is 'false', do NOT broadcast the transaction.
Multi-step flash-action: sells account collateral to the debt token and repays in one atomic transaction — no wallet tokens needed. To repay from wallet tokens instead, use write.account.repay. NOTE: If you are closing a position (remove LP + swap + repay + withdraw), prefer write.account.close which batches everything atomically. Only use this tool for standalone repayment while keeping the position active. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation — if tenderly_sim_status is 'false', do NOT broadcast the transaction.
Flash-action: stake, unstake, or claim rewards for an LP position in one atomic transaction. Use the `action` parameter to select the operation. `asset_address` is the position manager contract — pass the non-staked PM address when staking, or the staked PM address when unstaking. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Tenderly simulation may not be available for this endpoint — verify the position exists with read.account.info before signing.
Atomic flash-action that closes an Arcadia account position in ONE transaction. Combines up to 3 steps atomically: [burn LP position] + [swap all tokens to a single target asset] + [repay debt]. Tokens remain in the account after closing — use write.account.withdraw to send them to your wallet. ALWAYS try this tool first when closing/exiting a position. Only fall back to individual tools (write.account.remove_liquidity, write.account.swap, write.account.deleverage, write.account.withdraw) if this tool fails. Supports two modes: - close_lp_only=true: Burns LP and leaves underlying tokens in the account. Use as step 1 if the full close fails, then call again with close_lp_only=false to swap+repay the remaining tokens. - close_lp_only=false (default): Full atomic close — burns LP, swaps everything to receive_assets, repays debt. Remaining tokens stay in the account. Follow up with write.account.withdraw to send to wallet. Supports multiple receive assets with custom distribution. The returned calldata is time-sensitive — sign and broadcast within 30 seconds. If the transaction reverts due to price movement, rebuild and sign again immediately (retry at least once before giving up). Response includes tenderly_sim_url and tenderly_sim_status for pre-broadcast validation.
Build an unsigned approval transaction. For ERC20 tokens: generates approve(spender, amount). For ERC721/ERC1155 NFTs (e.g. LP positions): generates setApprovalForAll(operator, true). Required before write.account.deposit or write.account.add_liquidity (when depositing from wallet). Tip: call read.wallet.allowances first to check if approval already exists — skip this if the current allowance is sufficient.
Encode args for the rebalancer automation. When the LP position goes out of range, Arcadia's bot repositions it centered on the current price. All pending fees and staking rewards are claimed and compounded into the new position. Strategy config: 'default' (all params at defaults) uses when_out_of_range — rebalances exactly when price exits range. 'custom' (any param differs) uses time_and_price_based_triggers — adds configurable trigger offsets, cooldowns, and token composition. Returns { asset_managers, statuses, datas } — pass to write.account.set_asset_managers to build the unsigned tx. Combinable: merge arrays from multiple intent tools to configure several automations in one tx. trigger_lower_ratio and trigger_upper_ratio are independent — asymmetric configs are valid (e.g. trigger_lower_ratio=-50000, trigger_upper_ratio=0 means: trigger 5% of the tick range before the lower boundary is hit, but only trigger exactly at the upper boundary). Ratios represent tick distance, not price: a ratio of 50000 shifts the trigger by 5% of (tick_upper − tick_lower) ticks, which is not the same as 5% of price.
Encode args for the standalone compounder automation. Claims accumulated LP trading fees and reinvests them back into the position (compound interest). LP fees only — does NOT claim staking rewards like AERO; use write.asset_manager.compounder_staked for staked positions earning emission tokens. When paired with a rebalancer, the rebalancer compounds at rebalance time — adding a compounder also compounds between rebalances for higher effective APY. Returns { asset_managers, statuses, datas } — pass to write.account.set_asset_managers. Combinable with other intent tools.
Encode args for compounder coupled with CowSwap for staked LP positions (e.g. staked Slipstream/Aerodrome). Staked positions earn staking emission rewards (e.g. AERO, OP, or any configured emission token) — not LP fees. Claims these staking rewards, swaps them to a target token via CowSwap batch auctions (MEV-protected), then compounds back into the LP position. Sets metadata on BOTH the CowSwapper and the Compounder in a single call. sell_tokens is the list of reward token addresses (e.g. [AERO_address]). buy_token should be a major token in the pair (USDC, WETH, cbBTC). Returns { asset_managers, statuses, datas } with 2 entries (cowswapper + compounder). Base only. Combinable with other intent tools.
Encode args for the standalone yield claimer automation. Periodically claims pending fees/emissions and sends them to a designated recipient (wallet, another account, or any address). Returns { asset_managers, statuses, datas } — pass to write.account.set_asset_managers. Combinable with other intent tools.
Encode args for yield claimer coupled with CowSwap. Claims LP fees, then swaps the claimed tokens to a target token via CowSwap batch auctions (MEV-protected). For staked LPs, sell_tokens is the staking reward token list (e.g. [AERO_address]). For non-staked LPs, sell_tokens is all LP fee tokens except the buy_token — e.g. for a WETH/USDC LP claiming fees as USDC, use sell_tokens: [WETH_address], buy_token: USDC_address. Sets metadata on BOTH the CowSwapper and the Yield Claimer. Returns { asset_managers, statuses, datas } with 2 entries (cowswapper + yield_claimer). Base only. Combinable with other intent tools.
Encode args for standalone direct CowSwap mode. Enables the CowSwapper to swap any ERC20 → ERC20 via CoW Protocol batch auctions (MEV-protected). Unlike compounder_staked or yield_claimer_cowswap, this is NOT coupled to any other automation — each swap requires an additional signature from the account owner. Only available on Base (8453). Returns { asset_managers, statuses, datas } — pass to write.account.set_asset_managers. Combinable with other intent tools.
Encode args for the Merkl operator automation. Claims external Merkl protocol incentive rewards into the account — additional rewards paid by token teams on top of regular LP fees. Enable when the pool has active Merkl campaigns (check APY breakdown in read.strategy.list). Always combine with rebalancer when both are relevant — no conflict, extra free yield. Returns { asset_managers, statuses, datas } — pass to write.account.set_asset_managers. Combinable with other intent tools.
Build an unsigned setAssetManagers transaction from encoded intent args. Takes the { asset_managers, statuses, datas } arrays returned by write.asset_manager.* intent tools and builds a single unsigned tx targeting the account. To combine multiple automations in one tx, concatenate the arrays from multiple intent tool calls before passing them here. Example: to enable rebalancer + merkl_operator, call both intent tools, merge their arrays, then pass the merged arrays to this tool. Returns { transaction: { to, data, value, chainId } }.
DEV ONLY — Sign and broadcast an unsigned transaction using a local private key (PK env var). For production, use a dedicated wallet MCP server (Fireblocks, Safe, Turnkey, etc.) instead of this tool. Takes the transaction object returned by any write.* tool and submits it onchain.
概览
What is Arcadia Finance?
Arcadia Finance MCP server is a Model Context Protocol server for managing Uniswap and Aerodrome concentrated liquidity positions with built-in leverage, automated rebalancing, and yield optimization. It reads protocol data and builds unsigned transactions for LP management, borrowing, deposits, and more, designed for AI agents like Claude and Cursor to interact with Arcadia onchain.
How to use Arcadia Finance?
Install via npx using the MCP client configuration (VS Code, Cursor, etc.). The server requires Node.js >= 22 and environment variables RPC_URL_BASE, RPC_URL_UNICHAIN (optional, fallback to public RPC), and optionally PK for the dev-only signing tool. All write tools return unsigned transactions as { to, data, value, chainId } which must be signed externally.
Key features of Arcadia Finance
- Read account health, history, PnL, and automation status.
- Build unsigned transactions for LP management, borrowing, deposits, and swaps.
- Supports flash-actions: deposit + swap + mint LP with leverage atomically.
- Encode automation intents: rebalancer, compounder, yield claimer, CowSwap, and Merkl operator.
- List supported assets, lending pools, strategies, and a points leaderboard.
- Includes a dev-only signing tool (requires private key, not for production).
Use cases of Arcadia Finance
- AI agents managing concentrated liquidity positions with leverage across Uniswap and Aerodrome.
- Automating rebalancing and compounding of LP strategies via encoded asset manager intents.
- Querying account details, pool APYs, and strategy recommendations to inform onchain decisions.
- Building and signing unsigned transactions within agent workflows using external wallet infrastructure.
FAQ from Arcadia Finance
Do the write tools sign or broadcast transactions?
No, all write tools return unsigned transactions. The server does not sign or broadcast; your agent or application is responsible for that.
Can I use a private key with Arcadia Finance?
Yes, set the PK environment variable to enable the dev.send tool for signing transactions. This is intended for development only; for production use dedicated wallet infrastructure like Fireblocks, Turnkey, or Safe.
What chains does Arcadia Finance support?
The server supports Base (chain ID 8453) and Unichain (chain ID 130). You can set custom RPC URLs via RPC_URL_BASE and RPC_URL_UNICHAIN environment variables, otherwise public RPCs are used.
How do I check token allowances before depositing?
Use the read.wallet.allowances tool to check ERC20 token allowances for a spender before calling write.wallet.approve to avoid redundant approvals.
What are the prerequisites for running Arcadia Finance?
Node.js version 22 or higher is required. Install dependencies with yarn install and build with yarn build.
金融与商务 分类下的更多 MCP 服务器
Yahoo Finance MCP Server
narumiruna
💹 MCP YFinance Stock Server
Adity-starReal-time stock API with Python, MCP server example, yfinance stock analysis dashboard
Crypto Price & Market Analysis MCP Server
truss44A Model Context Protocol (MCP) server that provides real-time cryptocurrency analysis via CoinCap's API. Enables Claude and other MCP clients to fetch crypto prices, analyze market trends, and track historical data.
AI看线 - A股技术分析与AI预测工具
QuantML-GithubPython-based stock analysis tool that combines traditional technical analysis with AI prediction capabilities. Providing comprehensive stock analysis and forecasting using K-line charts, technical indicators, financial data, and news data. With CMD/WEB/MCP supported.
Awesome Crypto MCP Servers
badkkA collection of crypto MCP servers.
评论